This is How to Understand Gold - An Important Part of History for Centuries


This blog post explains how gold is used for jewelry in its different levels of purity.

I grew up in the back of my dad’s jewelry shop, always looking over the shoulder of the jewelers while they were repairing, reconditioning, or manufacturing a piece from scratch.

These old-school jewelers would always throw pennies into the mix with gold to use as an alloy which I found fascinating. I remember my dad would be complaining that the color would come out too red. He would buy “real alloy mix” but the jewelers would refuse to use it.

Gold has all kinds of colors

If you look at vintage jewelry from Europe, especially Italy, you can see it looks redder than what we have now. Gold has all kinds of colors. It’s hard to believe but all gold starts yellow, even white gold. The reason it looks so white is that it is usually rhodium-plated.
Rhodium, according to Wikipedia, is a chemical element with the symbol Rh and atomic number 45. It is a rare, silvery-white, hard, corrosion-resistant, and chemically inert transition metal. It is a noble metal and a member of the platinum group.

This is How to Understand Gold An Important Part of History for Centuries| Peter's Vault


Alloy metals are added to increase the hardness

The fineness of gold (coin, bar, jewelry, etc.) represents the weight of fine gold therein, in proportion to the total weight which includes alloying base metals and any impurities. Alloy metals are added to increase the hardness and durability of coins and jewelry, alter colors, and decrease the cost per weight.

The same is done with silver. For example, copper is added to the precious metal silver to make a more durable alloy for use in coins, housewares, and jewelry. Coin silver, which was used for making silver coins in the past, contains 90% silver and 10% copper, by mass. Sterling silver contains 92.5% silver and 7.5%, by mass, of other metals, usually copper.


Karats measure the parts per 24

Various ways of expressing fineness have been used and two remain in common use: millesimal fineness expressed in units of parts per 1,000 and karats used only for gold. Karats measure the parts per 24, so that 18 karats= 18⁄24 = 75%, and 24 karat gold is considered 100% gold.

Pure gold, the way it comes from the earth, is considered 24-karat gold. As I stated above, when being used in jewelry, it is blended with base metals to make it harder and to change the color

24 Karats is a Deep Yellow

So, before you fall asleep with the technical jargon, pure gold, 24 karats, is a deep yellow, then it is mixed with white alloys, and it comes out looking more white than yellow, and then we plate it with rhodium which makes it bright white.


Leave a comment

All blog comments are checked prior to publishing
You have successfully subscribed!
This email has been registered
Recently Viewed